Description
These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and crimp pins. Suitable for use as a coolant temperature or oil temperature sensor, and is occasionally used as an air temperature sensor in certain applications where a fast acting open element sensor may become damaged.
The threads are 3/8″ NPT pipe thread – note that isn’t an actual 3/8″ outer diameter, but a pipe thread size based on pipe inner diameter.
Product FAQ
What size hole do I need to drill to install this sensor?
- The hole should be tapped for 3/8″ NPT. Your tap will come with instructions for the preferred drill size, which is likely to be 9/16″.
What is its resistance vs temperature curve?
- If you are connecting this to a device that supports 3 point calibration (all MegaSquirt units do), use these numbers if your device does not have a standard GM temperature sensor calibration curve.
- 7000 ohms at 48 degrees F
- 1930 ohms at 87 degrees F
- 560 ohms at 146 degrees F
I am using it with a device that requires a voltage vs temperature curve. What data do I enter?
- This sensor outputs resistance, not voltage. You will need additional, external circuitry to convert its output into a voltage, and the voltage will depend on the design of the external circuit.
Can I buy the connector separately?
- We currently buy the sensor and connector as a single item and do not stock the connector on its own.