This product is one of Adaptonic’s plug-in ECUs, also called eMod009. It’s a direct plug and play for S4 Mazda RX7 FC.
Our main objective in creating the Adaptronic Modular ECU line is to work towards Adaptronic’s mission which is to give people control. In doing this, we came up with a system which would give people greater flexibility and at the same time, overcome the limitations of our main product line, the Select ECUs.
WHAT'S IN THE BOX?
- Engine control unit
- USB (tuning) cable
- 1GB USB Stick
- Adaptronic stickers
General Features
- Modular system, so that people can buy hardware upgrades later as their needs develop (eg additional inputs, outputs, or specific functions, eg drive by wire or built-in lambda)
- Wireless communication
- Fast USB communication, requiring no drivers
- Headphone port for listening to the knock sensor while tuning
- 4 x serial ports
- 1 x CAN port
- Power over USB to do loading of maps, firmware etc without having to provide it with 12V power
- 32MB of onboard logging to flash
- Exception logging, able to detect faults and log a bunch of things that happen around the same time to help with ECU setup and tech support
- Bigger maps, more of them, and more dedicated maps.
- Tested to MIL-STD-202G, a military vibration standard, which varies the frequency and peaks at 7.5g of oscillating acceleration
Features / Specifications
Variable | Number | Details |
Analogue 0-5V inputs | 11 | Each is 0 – 5.5V, 55k input impedance
|
Analogue oxygen sensor inputs | 2 | Each can be either:
|
Temperature inputs | 4 | Each is 0 – 5.5V, 55k input impedance to ground
Manifold air temperature, coolant temperature, oil temperature, fuel temperature |
Crank trigger inputs | 3 |
|
Vehicle speed input | 1 |
|
Sensor power and ground |
| |
Knock input | 1 |
|
Wired Outputs | 2 |
|
Headphone output | 1 | Mono output, can be selected as direct knock input or filtered knock input |
Power sources | 3 | ECU can be powered by 12V EFI input, ignition switch, or USB (USB for settings / firmware upgrades / log retrieval only; 12V must be applied to read inputs) |
CAN channel | 1 |
|
USB connection | 1 |
|
Serial connections | 4 |
|
Wireless connection | 1 |
|
Inbuilt sensors |
| |
Inbuilt logging | 32 MB |
|
Exception (fault) detection | 16 MB | Separate logging memory for storing logs during “exceptions” (sensor / trigger faults etc) |
Built-in scope | 4 channels |
Channels include
|
Main loop execution speed | Variable depending on tuning mode and corrections enabled, 400 Hz nominal |
Number of injector outputs | 8 |
|
Number of ignition outputs | 8 |
|
Number of aux outputs | 4 |
|
Hardware upgrade | 1 |
|